Keeping your Bissell CrossWave in top condition ensures it performs efficiently and lasts longer. Regular cleaning helps prevent clogs, maintain suction power, and extend the device’s lifespan. Follow these simple, safe steps to clean and troubleshoot your CrossWave effectively.
Always disconnect the machine from power before performing any cleaning or maintenance tasks.
Key Takeaways
| Proper disconnection | Always unplug before cleaning or troubleshooting. |
| Regular maintenance | Clean brushes and filters regularly for optimal performance. |
| Use recommended products | Use BISSELL cleaning solutions with the machine. |
| Troubleshoot common issues | Identify and resolve suction or clog problems promptly. |
BISSELL TurboClean, Upright Carpet Cleaner, Pro Max Clean & Protect + Oxy Urine Eliminator Formula Included, 3952
- Supports Pet Rescue Initiatives: Every purchase helps save pets
- Outperforms Lightweight Cleaners: Cleans tough pet and everyday messes
- DeepReach Powerbrush: Four-row brush removes ground-in dirt
As an affiliate, we earn on qualifying purchases.
Step 1: Unplug and Prepare
- Ensure the CrossWave is unplugged from the electrical outlet.
- Remove the water tank and empty any remaining water or solution.
Step 2: Clean the Brush Roll
- Remove the brush roll by following your model’s instructions (usually involves twisting or releasing clips).
- Rinse the brush roll thoroughly with warm water to remove hair, debris, and dirt buildup.
- Allow it to air dry completely before reinstalling.
Step 3: Wash or Replace Filters
Remove the filters and rinse them under warm water until clear. Let them dry completely before reinserting. Replace filters if they are damaged or excessively dirty.
Step 4: Clean the Solution and Water Tanks
Wash the tanks with warm, soapy water, and rinse thoroughly. Dry them completely before refilling.
Step 5: Clear Clogs and Check Suction
- Inspect hoses and nozzles for blockages. Use a long, flexible brush or pipe cleaner to dislodge debris.
- If suction is weak, check for trapped debris or buildup in the filter or brush area.
Tips and Warnings
- Always use BISSELL-approved cleaning solutions for best results.
- Never submerge the motor or electrical components in water.
- Regularly inspect for worn or damaged parts and replace as needed.
- Consult your user manual for model-specific cleaning instructions.
The Products in This Guide
BISSELL TurboClean
- ✔ Model Number: 3952
- ✔ Cleaning Path Width: 11 inches
- ✔ Run Time: N/A (corded)
JORAIR Brush Replacement Compatible
- ✔ Package Includes: 3 brush rolls, 3 filters, 1 cleaning brush
- ✔ Compatibility: Specific CrossWave models
- ✔ Material: High-quality plastic and foam
BISSELL TurboClean
The BISSELL TurboClean offers powerful deep cleaning with its 4-ROW DEEPREACH POWERBRUSH and lightweight design. It’s ideal for tackling tough stains on carpets and rugs, especially with pet messes, thanks to its Pro Max Clean & Protect formula.
Pros:
- Deep cleaning power with 4-ROW DEEPREACH POWERBRUSH
- Lightweight and easy to maneuver
- Includes Pro Max Clean & Protect formula
- Supports pet rescue initiatives
Cons:
- Limited to small spaces; not for large areas
- Requires regular cleaning of brushes and filters
- May need replacement parts over time
Best for: Pet owners and those needing quick, effective spot cleaning
Not ideal for: Large-scale carpet cleaning or commercial use
Bottom line: A lightweight, pet-friendly carpet cleaner perfect for quick, effective cleaning.
JORAIR Brush Replacement Compatible
This compatible brush roll and filter set ensures your CrossWave continues to perform at its best. Easy to install and affordable, it helps maintain optimal suction and cleaning power.
Pros:
- Compatible with multiple CrossWave models
- Includes 3 brush rolls and filters
- Easy to install and replace
- Affordable replacement option
Cons:
- Only compatible with specific models
- Requires periodic replacement
- Does not include cleaning solutions
Best for: Maintaining peak performance of your CrossWave
Not ideal for: For those needing original OEM parts
Bottom line: An affordable and effective replacement kit for your CrossWave maintenance.
Frequently Asked Questions
Can I use regular water to clean my CrossWave?
Yes, you can use clean water for basic cleaning, but for better results and odor elimination, use BISSELL cleaning solutions recommended for your model.
How often should I clean the brush roll?
It’s best to clean the brush roll after every few uses or whenever you notice hair or debris buildup to maintain suction and cleaning efficiency.
What should I do if my CrossWave is not suctioning properly?
Check for clogs in the hose or nozzle, clean or replace filters, and ensure the brush roll is free of debris. Refer to your manual for specific troubleshooting steps.
Can I submerge parts of my CrossWave in water?
No, avoid submerging the motor or electrical parts to prevent damage. Only wash removable tanks and brushes with water.
Keep Your CrossWave Performing at Its Best
Regular maintenance and proper cleaning of your Bissell CrossWave will ensure it continues to effectively tackle pet messes and everyday spills. Follow these steps and tips to prolong the life of your machine and enjoy spotless floors with ease.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
