If your Bissell carpet cleaner is leaving water behind after cleaning, it can be frustrating and hinder your cleaning routine. This guide walks you through the most common causes of excess water and provides practical, safe steps to fix the issue effectively. Whether it’s a clogged hose or a malfunctioning part, you’ll find clear instructions to restore your machine’s performance and keep your carpets dry and fresh.
Key Takeaways
| Clogged or Blocked Hoses | Check and clear hoses to prevent water backup. |
| Faulty Pump or Seal | Inspect and replace defective parts for proper water flow. |
| Dirty or Worn Filters | Clean or replace filters to improve suction and drainage. |
| Incorrect Use of Cleaning Solution | Use recommended solutions and correct dilution. |
| Overfilled Water Tank | Avoid overfilling to prevent leaks and overflow. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Check the Water Tank
- Ensure the water tank is properly seated and locked into place.
- Remove the tank and inspect for cracks or damage.
- Fill the tank only up to the recommended level; avoid overfilling.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Inspect and Clear Hoses
- Unplug the machine before inspecting hoses.
- Check for kinks, clogs, or blockages in the inlet and outlet hoses.
- Use a long, flexible brush or pipe cleaner to clear any obstructions.
- Reconnect securely and test for leaks.
Examine the Pump and Seals
Look for signs of wear or damage on the pump and its seals. If you notice cracks or leaks, consider replacing these parts. Consult your user manual for specific part replacement procedures or contact a service technician if needed.
Clean or Replace Filters
- Remove the filters from the machine.
- Wash filters with warm water and mild soap, then let dry completely.
- If filters are worn or damaged, replace them with compatible parts.
Use Correct Cleaning Solutions
Always use Bissell Multi-Surface Solution or recommended cleaning formulas as directed. Dilute solutions properly to prevent over-sudsing, which can cause water to leak or leave residue.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 17.5 lbs
- ✔ Tank Capacity: 1.25 gallons
- ✔ Dimensions: 13 x 13 x 43 inches
JORAIR Brush Replacement Compatible
- ✔ Weight: 8 oz
- ✔ Package Count: 3 brushes, 3 filters
- ✔ Material: Plastic and synthetic fibers
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner (35799) combines powerful suction with heatwave technology, ensuring thorough cleaning without leaving excess water. Designed with dual DirtLifter PowerBrushes, it tackles embedded dirt effectively.
Pros:
- Powerful 40% more suction
- Heatwave technology maintains water temperature
- Quiet operation with noise reduction
- Effective pet stain removal
Cons:
- Slightly heavier than basic models
- Requires regular filter cleaning
- Higher price point
Best for: Pet owners and heavily soiled carpets
Not ideal for: Light cleaning or quick touch-ups
Bottom line: A powerful, pet-friendly carpet cleaner that effectively removes dirt and stains while maintaining water temperature.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Compatible set offers multi-surface brush rolls and filters, improving cleaning efficiency and reducing clogging issues often caused by worn brushes.
Pros:
- Compatible with various Bissell CrossWave models
- Includes brushes and filters for complete maintenance
- Affordable replacement option
- Easy to install
Cons:
- Only compatible with specific models
- May require occasional replacement
- Not a direct fix for water leaks
Best for: Maintaining optimal brush performance
Not ideal for: As a solution for water leakage issues alone
Bottom line: A practical replacement kit to keep your CrossWave operating smoothly and effectively.
Frequently Asked Questions
Why is my Bissell carpet cleaner leaving water behind?
It could be due to clogged hoses, worn filters, a damaged pump, or overfilled water tanks. Follow the troubleshooting steps to identify and fix the cause.
How often should I clean or replace the filters?
Clean your filters monthly and replace them every 3-6 months, depending on usage, to maintain optimal performance.
Can I use any cleaning solution in my Bissell cleaner?
It is recommended to use Bissell Multi-Surface Solution or other approved formulas. Avoid using harsh chemicals that can damage the machine.
What should I do if my water tank leaks?
Inspect for cracks, ensure it is properly seated, and avoid overfilling. Replace the tank if damage is found.
Keep Your Carpets Dry and Fresh
By following these troubleshooting steps, you can resolve water leakage issues with your Bissell carpet cleaner and ensure a thorough, dry clean every time. Regular maintenance, proper use of cleaning solutions, and checking key components will prolong your machine’s lifespan and improve cleaning results.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
