If your Bissell ProHeat 2X Revolution Pet Turbo isn’t spraying water or cleaning solution, it can be frustrating. This guide walks you through practical, safe steps to identify and fix the problem, ensuring your carpet cleaner works effectively again.
Follow these instructions carefully to troubleshoot common causes and get your device back to peak performance.
Key Takeaways
| Clogged Nozzle | Clear blockages to restore spray function. |
| Water Tank Issues | Ensure tanks are properly seated and filled. |
| Pump Malfunction | Check pump operation and connections. |
| Filter Blockages | Clean or replace dirty filters. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Check the Water and Solution Tanks
- Ensure both the clean water and solution tanks are properly filled and seated securely in their compartments.
- Make sure the solution tank is not empty or clogged at the outlet.
- Remove and reattach the tanks to confirm they are fitted correctly, as improper placement can prevent spraying.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Inspect and Clear the Nozzle
- Locate the spray nozzle at the front of the cleaner.
- Use a small brush or pin to gently remove any debris or buildup blocking the nozzle opening.
- Run water through the nozzle or soak it in warm vinegar to dissolve any stubborn clog.
Check the Pump and Hoses
- Unplug the unit before inspecting.
- Verify that the pump is working by listening for a humming sound when the spray mode is activated.
- Inspect hoses for kinks, blockages, or leaks and straighten or replace if necessary.
Clean or Replace Filters
- Remove any accessible filters, including those in the solution and recovery tanks.
- Wash filters with warm water and mild soap, then dry thoroughly.
- If filters are damaged or excessively dirty, replace them with compatible ones.
Test the Machine
After completing the above steps, reassemble the cleaner and perform a test spray on a small carpeted area. Ensure the spray activates properly and water flows evenly.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18.5 lbs
- ✔ Capacity: 1.25 gallons
- ✔ Cord Length: 25 ft
JORAIR Brush Replacement Compatible
- ✔ Weight: 0.5 lbs
- ✔ Filter Type: Reusable foam
- ✔ Roll Diameter: Approx. 9.84 inches
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers advanced cleaning with TurboStrength Motor Technology, delivering 40% more suction power and quieter operation. It excels in removing embedded dirt, stains, and allergens with its MAX Clean Mode, making it suitable for deep cleaning needs.
Pros:
- High suction power
- Quiet operation
- Effective pet stain removal
- Multiple cleaning modes
Cons:
- Heavier than basic models
- Requires regular filter maintenance
- Higher price point
Best for: Deep cleaning heavily soiled carpets and pet owners
Not ideal for: Light cleaning or occasional use
Bottom line: A powerful, pet-friendly carpet cleaner with advanced features.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement kit offers compatible brushes and filters for Bissell CrossWave, providing a cost-effective way to maintain your machine’s cleaning performance.
Pros:
- Affordable
- Easy to install
- Compatible with multiple models
- Includes cleaning brush
Cons:
- Limited to CrossWave models
- Not a universal fit
- Does not include solution
Best for: Maintaining and replacing worn brushes and filters
Not ideal for: If you need a complete cleaning solution or parts for other models
Bottom line: A practical set for keeping your CrossWave in top shape.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include clogged nozzles, empty or improperly seated tanks, pump malfunctions, or dirty filters. Check these components as outlined in the troubleshooting steps.
How do I unblock the spray nozzle?
Remove the nozzle and use a small brush or pin to clear any debris. Rinsing with warm water or soaking in vinegar helps dissolve stubborn clogs.
What should I do if the water tanks are full but still not spraying?
Ensure tanks are correctly seated and that the outlet ports are free of obstructions. Also, verify the pump is functioning properly.
Can I use different cleaning solutions with my Bissell?
Yes, use only solutions recommended for your model, like the BISSELL Multi-Surface Solution, to avoid damage and ensure optimal cleaning.
Bring Your Carpet Back to Life
By following these troubleshooting steps, you can resolve most issues that cause your Bissell carpet cleaner not to spray. Regular maintenance and using compatible cleaning solutions will extend your machine’s lifespan and keep your carpets looking fresh and clean.
If problems persist, consider contacting customer support or replacing worn parts like filters or brushes for continued effective performance.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
