If your Bissell ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner isn’t pulling up water or debris, it can be frustrating. Loss of suction often indicates a blockage, a clogged filter, or an issue with the motor or hoses. This guide provides clear, safe steps to diagnose and restore your cleaner’s suction power, ensuring it works like new.
Key Takeaways
| Identify common causes | Blockages, clogged filters, or faulty hoses often cause suction loss. |
| Check filters and brushes | Dirty filters or worn brushes reduce suction and cleaning performance. |
| Inspect the hose and intake | Clear obstructions in hoses or intake ports to restore suction. |
| Ensure proper assembly | Incorrect assembly can impair suction; double-check connections. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Power Off and Unplug the Cleaner
Before troubleshooting, turn off your Bissell cleaner and unplug it from the power outlet to ensure safety during inspection and repairs.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Check and Clean the Filters
- Locate the water tank and filter compartment, usually at the front of the cleaner.
- Remove the filter and check for dirt or debris buildup.
- Rinse the filter under warm water until clean, and let it dry completely before reinstalling.
Inspect the Brush Roll and Agitator
Remove the brush roll to check for tangled hair, fibers, or debris that could block airflow. Clean the brushes thoroughly and reassemble.
Examine the Hoses and Intake Ports
- Disconnect the hose from the machine and look for blockages or clogs.
- Use a long, flexible brush or a stick to gently clear any debris inside the hose.
- Check the intake port on the cleaner for obstructions and clean if necessary.
Test the Machine and Reassemble
After cleaning, reassemble all parts carefully, plug in your cleaner, and run a test. If suction improves, you’re all set. If not, further inspection of internal parts may be necessary.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 19 lbs
- ✔ Tank Capacity: 1.8L
- ✔ Cord Length: 25 ft
JORAIR Brush Replacement Compatible
- ✔ Weight: 1.2 lbs
- ✔ Durability: High-quality materials
- ✔ Warranty: N/A
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful suction with TurboStrength Technology, making it ideal for cleaning embedded dirt, stains, and allergens. Its heatwave technology maintains water temperature, enhancing cleaning performance.
In my testing, the motor’s high suction power quickly lifted dirt, and the dual DirtLifter PowerBrushes scrubbed effectively, even in high-traffic areas.
Pros:
- Powerful suction with TurboStrength Motor
- Effective pet stain removal
- Heatwave technology maintains water temperature
- Quiet operation with 50% noise reduction
Cons:
- Heavier than some models
- Requires regular filter cleaning
- Can be noisy if filters are clogged
Best for: Deep cleaning homes with pets or heavily soiled carpets
Not ideal for: Light cleaning or quick refreshes
Bottom line: A powerful, pet-friendly carpet cleaner that tackles deep stains effectively.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement Kit provides multi-surface brushes and filters compatible with Bissell CrossWave models, ensuring your machine maintains optimal suction and cleaning performance.
Pros:
- Easy to install
- Affordable replacement parts
- Includes multiple brushes and filters
- Enhances cleaning efficiency
Cons:
- Only compatible with specific CrossWave models
- Requires periodic replacement
Best for: Maintaining peak performance of CrossWave machines
Not ideal for: For non-compatible models or standard upright cleaners
Bottom line: A cost-effective way to keep your CrossWave performing at its best.
Frequently Asked Questions
Why is my Bissell carpet cleaner losing suction?
Common causes include clogged filters, blocked hoses, dirty brushes, or improper assembly. Regular maintenance can prevent suction loss.
How often should I clean the filters?
Check and clean filters every 1-3 uses, especially if you notice reduced suction or performance issues.
Can I use other cleaning solutions in my Bissell cleaner?
It’s best to use solutions recommended by Bissell, like the Multi-Surface Solution or Deep Clean formulas, to avoid damage.
What should I do if cleaning and inspecting doesn’t restore suction?
If issues persist, contact Bissell customer support or consider professional repair services to diagnose potential motor or internal component problems.
Keep Your Bissell Performing at Its Best
Regular maintenance, including cleaning filters, inspecting hoses, and replacing worn brushes, will keep your Bissell carpet cleaner working effectively. Troubleshooting suction loss is straightforward with these steps, helping you restore powerful cleaning performance quickly and safely.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
